View previous topic :: View next topic |
Author |
Message |
Rahull Beginner
Joined: 29 Jan 2004 Posts: 62 Topics: 19
|
Posted: Wed May 26, 2004 3:41 am Post subject: Download JSCAN |
|
|
Hi,
At the time of JEM how should I save the expanded JCL/PROC in file?
Becase after JEM when I try to cut and paste it include only the original JCL
Thanks
Rahul |
|
Back to top |
|
|
Brian Beginner
Joined: 12 Aug 2003 Posts: 95 Topics: 6
|
Posted: Wed May 26, 2004 4:52 am Post subject: |
|
|
Rahull,
You can control the amount of messages written along with the job using the MSGLEVEL parameter on the jobcard.
Cheers
Brian |
|
Back to top |
|
|
kolusu Site Admin
Joined: 26 Nov 2002 Posts: 12367 Topics: 75 Location: San Jose
|
Posted: Wed May 26, 2004 5:40 am Post subject: |
|
|
Rahull,
You can run JEM in Batch. I don't remember the JCL on top of my head but the pgm is J02YJS. The manual had an example of the batch JCl. If you cannot find the documentation then ravi's idea is a better choice
Hope this helps...
Cheers
Kolusu _________________ Kolusu - DFSORT Development Team (IBM)
DFSORT is on the Web at:
www.ibm.com/storage/dfsort
www.linkedin.com/in/kolusu |
|
Back to top |
|
|
vak255 Intermediate
Joined: 10 Sep 2004 Posts: 384 Topics: 79
|
Posted: Mon Dec 13, 2004 12:25 am Post subject: XDC option ????? |
|
|
Hi,
would u pls explain a little bit on this. |
|
Back to top |
|
|
Phantom Data Mgmt Moderator
Joined: 07 Jan 2003 Posts: 1056 Topics: 91 Location: The Blue Planet
|
Posted: Mon Dec 13, 2004 1:11 am Post subject: |
|
|
vak255,
XDC is used to copy your spool messages to a dataset. For example if you want to copy the SYSOUT messages of a SORT routine. Go to the JOBLOG in your SPOOL. Issue a '?' to list the SYSOUT & other JES messages. Tab to the SYSOUT DD and and issue the command XDC as shown below.
Code: |
SDSF JOB DATA SET DISPLAY - JOB TSOXXXX0 (JOB04388) DATA SET DISPLAYED
COMMAND INPUT ===> SCROLL ===> CSR
NP DDNAME StepName ProcStep DSID Owner C Dest Rec-Cnt Page
JESMSGLG JES2 2 TSOXXXX X LOCAL 17
JESJCL JES2 3 TSOXXXX X LOCAL 14
JESYSMSG JES2 4 TSOXXXX X LOCAL 49
XDC SYSOUT R010 103 TSOXXXX X LOCAL 56
SORTOUT R010 104 TSOXXXX X LOCAL 3
|
It will then prompt you to enter a dataset name in which you want to store the SYSOUT information. Provide the dataset name & DCB information and press enter !.
Code: |
SDSF Open Print Data Set
COMMAND INPUT ===> SCROLL ===> CSR
Data set name ===> 'T.MYJOB.OUTPUT'
Member to use ===>
Disposition ===> NEW (OLD, NEW, SHR, MOD)
If the data set is to be created, specify the following.
Volume serial will be used to locate existing data sets if specified.
Management class ===> CTSPDS (Blank for default management class)
Storage class ===> CTSDASD (Blank for default storage class)
Volume serial ===> (Blank for authorized default volume) *
Device type ===> (Generic unit or device address) *
Data class ===> CTSPDS (Blank for default data class)
Space units ===> TRKS (BLKS, TRKS, CYLS, BY, KB, or MB)
Primary quantity ===> 20 (In above units)
Secondary quantity ===> 10 (In above units)
Directory blocks ===> (Zero for sequential data set)
Record format ===> FBA
Record length ===>
Block size ===>
* Only one of these fields may be specified
|
Hope this helps,
Thanks,
Phantom |
|
Back to top |
|
|
dojeb Beginner
Joined: 14 Jan 2003 Posts: 13 Topics: 0 Location: Morgan Hill, CA,USA
|
Posted: Mon Dec 20, 2004 4:20 pm Post subject: JOB/SCAN |
|
|
HI Rahull
Please contact us (Diversified Software) 800/273-3774 for any and all queries on JEM, JSCAN, JREF, JCHG Edit Macors as well as using the Panels and Pure Batch |
|
Back to top |
|
|
Rahull Beginner
Joined: 29 Jan 2004 Posts: 62 Topics: 19
|
Posted: Tue Jan 25, 2005 5:17 am Post subject: |
|
|
Hi,
Please suggest me for the below query:
Our JCLs are having procs only and procs use only symbolic parameter.
Now I have to create a PDS which will have all the expanded JCLs ???
Its not already present in my system. |
|
Back to top |
|
|
kolusu Site Admin
Joined: 26 Nov 2002 Posts: 12367 Topics: 75 Location: San Jose
|
Posted: Tue Jan 25, 2005 6:41 am Post subject: |
|
|
Rahull,
Run the JSCAN/JEM in batch mode and code the output to be a pds member.
Hope this helps...
Cheers
Kolusu _________________ Kolusu - DFSORT Development Team (IBM)
DFSORT is on the Web at:
www.ibm.com/storage/dfsort
www.linkedin.com/in/kolusu |
|
Back to top |
|
|
Rahull Beginner
Joined: 29 Jan 2004 Posts: 62 Topics: 19
|
Posted: Tue Jan 25, 2005 7:17 am Post subject: |
|
|
Hi Kolusu,
Thanks for the prompt reply.
So you mean to say that I have to use "TYPRUN=SCAN" for each JCL. But its a list of 4000 JCL. I will go mad doing each individually.
Can you paste JCL code for the above requirement of mine?
Thanks in Advance.
Rahul |
|
Back to top |
|
|
kolusu Site Admin
Joined: 26 Nov 2002 Posts: 12367 Topics: 75 Location: San Jose
|
Posted: Tue Jan 25, 2005 8:31 am Post subject: |
|
|
Quote: |
So you mean to say that I have to use "TYPRUN=SCAN" for each JCL. But its a list of 4000 JCL. I will go mad doing each individually.
|
Rahull,
I meant to run JEM/JSCAN in batch mode, not submit jobs manually.
The batch JCL for JEM/JSCAN at my shop may differ from yours. So check with your co-workers/systems people of right JCL
Kolusu _________________ Kolusu - DFSORT Development Team (IBM)
DFSORT is on the Web at:
www.ibm.com/storage/dfsort
www.linkedin.com/in/kolusu |
|
Back to top |
|
|
dojeb Beginner
Joined: 14 Jan 2003 Posts: 13 Topics: 0 Location: Morgan Hill, CA,USA
|
Posted: Tue Jan 25, 2005 11:30 am Post subject: |
|
|
HI Rahull
In the JOB/SCAN SAMPLIB library there is a batch job you can run called JSMVS. You can set the output to go to a PDS library. For every job that you process, each job with be written out with their expanded Proc and resolved symbolics. |
|
Back to top |
|
|
Rahull Beginner
Joined: 29 Jan 2004 Posts: 62 Topics: 19
|
Posted: Thu Jan 27, 2005 12:34 am Post subject: |
|
|
Hi Dojeb,
I don't know much about JOB/SCAN SAMPLIB. Are you talking about JS option at ISPF Screen. I tried that also...but i am not able to direct each expanded job to PDS.
Please advice me and if possible give me steps to do the above.
Thanks in advance
Rahul |
|
Back to top |
|
|
kolusu Site Admin
Joined: 26 Nov 2002 Posts: 12367 Topics: 75 Location: San Jose
|
Posted: Thu Jan 27, 2005 8:50 am Post subject: |
|
|
Quote: |
I don't know much about JOB/SCAN SAMPLIB. Are you talking about JS option at ISPF Screen. I tried that also...but i am not able to direct each expanded job to PDS.
|
Rahull,
You are invoking CLIST for performing the JSCAN by typing the command JS. Now try to look at the source of JS which will give some info about the JSCAN libraries.
Why don't you talk to your systems personnel about the batch JCL.
Hope this helps...
Cheers
kolusu _________________ Kolusu - DFSORT Development Team (IBM)
DFSORT is on the Web at:
www.ibm.com/storage/dfsort
www.linkedin.com/in/kolusu |
|
Back to top |
|
|
dojeb Beginner
Joined: 14 Jan 2003 Posts: 13 Topics: 0 Location: Morgan Hill, CA,USA
|
Posted: Thu Jan 27, 2005 10:52 am Post subject: |
|
|
HI Rahull
Please call me at 800/273-3774
Doug Berg |
|
Back to top |
|
|
Sreejith Intermediate
Joined: 02 Dec 2002 Posts: 155 Topics: 25 Location: N.Ireland
|
Posted: Tue Feb 01, 2005 12:40 pm Post subject: |
|
|
You can use the MD line command. Make sure not to overwrite your original JCL.
Code: |
The MD (Make Dataline) command converts temporary lines to data lines
for one line, several lines, or a block of lines. The command syntax
is:
MD Convert a line
MDn Convert 'n' lines
MDD or MDMD Convert a block of lines
To convert one line, type "MD" in the line command area of the line
to be converted. To convert more than one line, type "MDn", where
"n" is the number of lines to be converted. To convert a block of
lines, type "MDD" or "MDMD", cursor or scroll to another line, and
type "MDD" or "MDMD" again. In each case, the temporary line or
lines is converted into data lines when you press the ENTER key.
|
Sreejith |
|
Back to top |
|
|
|
|