MVSFORUMS.com

[mwdazzo]

I have 2 questions;

1. We are running zOS1.7, after specifying in sys1.parmlib what res to use (primary or alts) and ipling the log displays the following. In my case I want the alternates used for testing.
IEA007I STATIC SYSTEM SYMBOL VALUES 077
&SYSALVL. = "2"
&SYSCLONE. = "20"
&SYSNAME. = "SYS1"
&SYSPLEX. = "LOCAL"
&SYSR1. = "TZOSP1"
&SYSR2. = "TZOSA1"
&SYSR3. = "TZOSA2"
My questions is, &SYSR1 equals the primary res but &SYSR2 and 3 equals the alt res's. Is this normal? My settings in parmlib state to use the alt's.

2. What is the best way to determine what res's are used?

Thanks

[Bill Dennis]

The Init and Tuning manual says "Define static symbols &SYSR2, &SYSR3, and so on, in the IEASYMxx "

Are you using an alternate IEASYMxx in LOADxx?
_________________
Regards,
Bill Dennis

Disclaimer: My comments on this foorum are my own and do not represent the opinions or suggestions of any other person or business entity.

[warp5]

It seems to me that you are actually ipling from the tzosp1 disk, are you running in an lpar? Are you ipling the lpar from the alternate disk?

[nevilh]

&SYSR2 and 3 will not be filled by the system they will have whatever value you specified.

[taltyman]

Here is a sample from one of my lpars...
SYSDEF LPARNAME(SYSA)
SYSCLONE(TT)
SYMDEF(&SUBAREA.='16')
SYMDEF(&VTAMPRM.='TT')
SYMDEF(&MVSNAME.='SYST')
SYMDEF(&MVSID.='T')
SYMDEF(&HSMPARM.='TY')
SYMDEF(&LOGCLS.='0')
SYMDEF(&RSUVAL.='00')
SYMDEF(&CNMTCPN='TCPIP')
SYMDEF(&CNMRODM='RODM')
SYMDEF(&CNMNETID='USTUSI01')
SYMDEF(&SYSR2.='&SYSR1(1:5).2')
SYMDEF(&SYSR3.='&SYSR1(1:5).3')
SYMDEF(&SYSR4.='&SYSR1(1:5).4')
SYMDEF(&SYSR5.='&SYSR1(1:5).5')

[mwdazzo]

Thanks, the problem was that I did not change the ipl address to the alt primary res. Thanks