senthilssg
Beginner
Joined: 19 Jan 2006
Posts: 4
Topics: 4
|
 Posted: Sat May 13, 2006 5:04 am Post subject: SOC4- 38 abend while stattup of DB2V8 on zos v1r4 |
 |
|
Hi all ,
I got the following error , when db2v8 system was brought up .
we had installed fresh db2 installation in our system . \
| Quote: |
12.52.20 STC03732 *DSNV086E -DBZS DB2 ABNORMAL TERMINATION REASON=00E80100
12.52.20 STC03732 IEF450I DBZSDBM1 DBZSDBM1 - ABEND=S0C4 U0000 REASON=00000038
945 TIME=12.52.20
|
This error occured when the start up of DB2dbm1 address space .
I checked in the book manger for the above abend
| Code: |
S0c4--38
38 ASCE Type exception. This error is caused by one of the following:
A program attempted to reference storage that had not been obtained. To correct the error, allocate the storage before attempting to reference it.
A program running in 64-bit addressing mode used a 31-bit pointer that had the high order bit on.
Note: Programs running in 31-bit mode using 4-byte pointers often use the high order bit of a 4-byte pointer to indicate 31-bit addressing mode,
versus 24-bit mode. Also, certain instructions will set the high order bit on in registers to indicate addressing mode.
A program running in 64-bit addressing mode loaded a 31-bit pointer into a 64-bit register and did not clear the high half of the register. To
correct the error, ensure that the program running in 64-bit addressing mode clears the 33 high-order bits of any register when loading a 31-bit
pointer into that register.
|
we have hardware of 64 bit and zos also running in 64 bit addressing mode (ie ARCHLVL=2) .
I am not able to fix where the problem lies ? Why it s giving that ablend .
Can u please help me , to fix this issue .
Regards ,
Senthil |
|
FAQ
Search
Quick Manuals
Register
Profile
Log in to check your private messages
Log in
